Prolink Outdoor Wireless Bridge N300 CPE/AP - PHN1102

PROLiNK® PHN1102 is designed with IP65 dust-tight water-resistant robust housing, making it an ideal solution for creating outdoor Point-to-Point or Access Point networks. It has LED signal indicator showing current signal strength allowing installers or system commissioners to easily troubleshoot.

HARDWARE FEATURES

Interface : 1* 10/100Mbps Ethernet WAN Port (Passive PoE In) 1* 10/100Mbps Ethernet LAN Port 1* Reset Button 1* S(Slave)/M(Master) toggle switch
Power : Supply Passive Power over Ethernet through WAN Port, or DC Jack In (12V 1A)
LED Indicator : Power, LAN, WAN, Master/Slave, Wi-Fi Channel
Antenna Type : Built-in 12dBi High Performance Panel Antenna Beam Width: 60°
Enclosure : Outdoor IP65 Dust-tight Water-Resistant Protection

WIRELESS FEATURES

Wireless : Standards IEEEE 802.11 b/g/n
Frequency : 2.4GHz N
Data Rate : Up to 300Mbps
Transmit Power : Up to 20dBm Note: maximum transmission power may vary across different countries subject to local regulatory and regions in which the device is used
Transmission Distance : Up to 2Km (in Wireless Bridge mode) *
Multiple SSID Support : Up to 4 Multiple SSID
Physical Master/Slave Configuration : Configurable through S(Slave)/M(Master) toggle switch in the device (only for Wireless Bridge/WDS mode)
Wi-Fi Analyser : Supported

SOFTWARE FEATURES

Wireless : 2.4GHz a/an/ac modes Automatic / Static Channel
Configurations : Selection Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption SSID Broadcast Enable/Disable Multi-SSID Wireless MAC Address Filter
Operation Mode : Wireless Bridge/WDS, Gateway, Wi-Fi Repeater, Wireless AP
WAN Connection Type : Dynamic IP, Static IP, PPPoE
Management : Web-based http management (local / remote) Device discoverable through PROLiNK Wireless Controller (when WAN mode is set to get DHCP from AC) System Log
System Tools : Run-time Wireless Traffic Connection Rate Wireless Analyser Connected Clients information